diff --git a/include/configs/OCOTEA.h b/include/configs/OCOTEA.h
new file mode 100644
index 0000000..0b1873e
--- /dev/null
+++ b/include/configs/OCOTEA.h
@@ -0,0 +1,248 @@
+/*
+ * (C) Copyright 2004 Paul Reynolds <PaulReynolds@lhsolutions.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * 1 March 2004  Travis B. Sawyer <tsawyer@sandburst.com>
+ * Adapted to current Das U-Boot source
+ ***********************************************************************/
+
+
+/************************************************************************
+ * OCOTEA.h - configuration for IBM 440GX Ref (Ocotea)
+ ***********************************************************************/
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_OCOTEA		1	    /* Board is ebony		*/
+#define CONFIG_440_GX           1           /* Specifc GX support       */
+#define CONFIG_4xx		1	    /* ... PPC4xx family	*/
+#define CONFIG_BOARD_EARLY_INIT_F 1	    /* Call board_pre_init	*/
+#undef	CFG_DRAM_TEST			    /* Disable-takes long time! */
+#define CONFIG_SYS_CLK_FREQ	33333333    /* external freq to pll	*/
+
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ *----------------------------------------------------------------------*/
+#define CFG_SDRAM_BASE	    0x00000000	    /* _must_ be 0		*/
+#define CFG_FLASH_BASE	    0xff800000	    /* start of FLASH		*/
+#define CFG_MONITOR_BASE    0xfff80000	    /* start of monitor		*/
+#define CFG_PCI_MEMBASE	    0x80000000	    /* mapped pci memory	*/
+#define CFG_PERIPHERAL_BASE 0xe0000000	    /* internal peripherals	*/
+#define CFG_ISRAM_BASE	    0xc0000000	    /* internal SRAM		*/
+#define CFG_PCI_BASE	    0xd0000000	    /* internal PCI regs	*/
+
+#define CFG_FPGA_BASE	    (CFG_PERIPHERAL_BASE + 0x08300000)
+#define CFG_NVRAM_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x08000000)
+
+/*-----------------------------------------------------------------------
+ * Initial RAM & stack pointer (placed in internal SRAM)
+ *----------------------------------------------------------------------*/
+#define CFG_TEMP_STACK_OCM  1
+#define CFG_OCM_DATA_ADDR   CFG_ISRAM_BASE
+#define CFG_INIT_RAM_ADDR   CFG_ISRAM_BASE  /* Initial RAM address	*/
+#define CFG_INIT_RAM_END    0x2000	    /* End of used area in RAM	*/
+#define CFG_GBL_DATA_SIZE   128		    /* num bytes initial data	*/
+
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_POST_WORD_ADDR      (CFG_GBL_DATA_OFFSET - 0x4)
+#define CFG_INIT_SP_OFFSET      CFG_POST_WORD_ADDR
+
+#define CFG_MONITOR_LEN	    (256 * 1024)    /* Reserve 256 kB for Mon	*/
+#define CFG_MALLOC_LEN	    (128 * 1024)    /* Reserve 128 kB for malloc*/
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#undef	CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_EXT_SERIAL_CLOCK	(1843200 * 6)	/* Ext clk @ 11.059 MHz */
+#define CONFIG_BAUDRATE		115200
+
+#define CFG_BAUDRATE_TABLE  \
+    {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+/*-----------------------------------------------------------------------
+ * NVRAM/RTC
+ *
+ * NOTE: Upper 8 bytes of NVRAM is where the RTC registers are located.
+ * The DS1743 code assumes this condition (i.e. -- it assumes the base
+ * address for the RTC registers is:
+ *
+ *	CFG_NVRAM_BASE_ADDR + CFG_NVRAM_SIZE
+ *
+ *----------------------------------------------------------------------*/
+#define CFG_NVRAM_SIZE	    (0x2000 - 8)    /* NVRAM size(8k)- RTC regs */
+#define CONFIG_RTC_DS174x	1		    /* DS1743 RTC		*/
+
+/*-----------------------------------------------------------------------
+ * FLASH related
+ *----------------------------------------------------------------------*/
+#define CFG_MAX_FLASH_BANKS	3		    /* number of banks	    */
+#define CFG_MAX_FLASH_SECT	64		    /* sectors per device   */
+
+#undef	CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+
+/*-----------------------------------------------------------------------
+ * DDR SDRAM
+ *----------------------------------------------------------------------*/
+#define CONFIG_SPD_EEPROM       1        /* Use SPD EEPROM for setup     */
+#define SPD_EEPROM_ADDRESS {0x53,0x52}  /* SPD i2c spd addresses        */
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C		1	    /* I2C with hardware support	*/
+#undef	CONFIG_SOFT_I2C			    /* I2C bit-banged		*/
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CFG_I2C_SLAVE		0x7F
+#define CFG_I2C_NOPROBES    {0x69}  /* Don't probe these addrs */
+
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+#define CFG_ENV_IS_IN_NVRAM	1	    /* Environment uses NVRAM	*/
+#undef	CFG_ENV_IS_IN_FLASH		    /* ... not in flash		*/
+#undef	CFG_ENV_IS_IN_EEPROM		    /* ... not in EEPROM	*/
+#define CONFIG_ENV_OVERWRITE    1
+
+#define CFG_ENV_SIZE		0x1000	    /* Size of Environment vars */
+#define CFG_ENV_ADDR		\
+	(CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE)
+
+#define CONFIG_BOOTARGS		"root=/dev/hda1 "
+#define CONFIG_BOOTCOMMAND	"bootm ffc00000"    /* autoboot command */
+#define CONFIG_BOOTDELAY	-1		    /* disable autoboot */
+#define CONFIG_BAUDRATE		115200
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+
+#define CONFIG_MII		1	/* MII PHY management		*/
+#define CONFIG_NET_MULTI	1
+#define CONFIG_PHY_ADDR		1	/* PHY address, See schematics	*/
+#define CONFIG_PHY1_ADDR        2
+#define CONFIG_PHY2_ADDR        0x10
+#define CONFIG_PHY3_ADDR        0x18
+#define CONFIG_CIS8201_PHY      1       /* Enable 'special' RGMII mode for Cicada phy */
+#define CONFIG_NETMASK          255.255.255.0
+#define CONFIG_IPADDR           10.1.2.3
+#define CONFIG_ETHADDR          00:04:AC:E3:28:8A
+#define CONFIG_ETHADDR1         00:04:AC:E3:28:8B
+#define CONFIG_ETHADDR2         00:04:AC:E3:28:8C
+#define CONFIG_ETHADDR3         00:04:AC:E3:28:8D
+#define CFG_RX_ETH_BUFFER       32        /* Number of ethernet rx buffers & descriptors */
+#define CONFIG_SERVERIP         10.1.2.2
+
+#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
+				CFG_CMD_PCI	| \
+				CFG_CMD_IRQ	| \
+				CFG_CMD_I2C	| \
+				CFG_CMD_KGDB	| \
+				CFG_CMD_DHCP	| \
+				CFG_CMD_DATE	| \
+				CFG_CMD_BEDBUG	| \
+                                CFG_CMD_PING    | \
+				CFG_CMD_DIAG    | \
+                                CFG_CMD_MII     | \
+                                CFG_CMD_NET     | \
+				CFG_CMD_ELF	)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG			/* watchdog disabled		*/
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory		*/
+#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#else
+#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args	*/
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+
+#define CFG_LOAD_ADDR		0x100000	/* default load address */
+#define CFG_EXTBDINFO		1	/* To use extended board_into (bd_t) */
+
+#define CFG_HZ		100		/* decrementer freq: 1 ms ticks */
+
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+/* General PCI */
+#define CONFIG_PCI			            /* include pci support	        */
+#define CONFIG_PCI_PNP			        /* do pci plug-and-play         */
+#define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup  */
+#define CFG_PCI_TARGBASE    0x80000000  /* PCIaddr mapped to CFG_PCI_MEMBASE */
+
+/* Board-specific PCI */
+#define CFG_PCI_PRE_INIT                /* enable board pci_pre_init()  */
+#define CFG_PCI_TARGET_INIT	            /* let board init pci target    */
+
+#define CFG_PCI_SUBSYS_VENDORID 0x1014  /* IBM */
+#define CFG_PCI_SUBSYS_DEVICEID 0xcafe  /* Whatever */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE		8192	/* For IBM 405 CPUs			*/
+#define CFG_CACHELINE_SIZE	32	/* ...			*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+#endif	/* __CONFIG_H */